Loading... Please wait...

3/4" x 2/3VPC Series Timber Wolf® band saw blades

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
2.00 LBS
Calculated at checkout

 Product Description

Timber Wolf® 3/4" x 2/3VPC

Blade Designation: Resawing Kiln Dry Domestic Wood

Width: 3/4"
TPI (Tooth Per Inch): 2/3
Tooth Design: VPC (variable positive claw)
Blade Thickness: .025
Kerf: .049
Tooth Hook Angle: 6.5°
Tooth Set Pattern: 5 Raker Set
Radius of Cut: 5 7/16"

Thickness of Work Material to be cut
Kiln Dry Wood: Hardwood 3" - 12" Softwood 3" - 10"

 Product Reviews

  1. Well worth it

    Posted by Tim on 04 12 2018

    Just finished installing and adjusting the blade on my Grizzly 14" bandsaw. Finally made the purchase when my latest project calls for 1/4" walnut panels. Resawed my first set of panels with the original Grizzly 3/8" 6TPI blade from 3/4" stock, and the resulting panels required significant planing of the rough surfaces to the point where I still had some minor irregularities by the time I planed down to 1/4". Repeated the same procedure with the newly installed 3/4" 3TPI Timberwolf. The results were very satisfying. I won't even need to send the resawn panels through the planer, but will be able finish of with a few light passes of my smoothing plane or even a card scraper.

    I did follow Timberwolf's instructions for tracking alignment and flutter tensioning.

  2. Sharp, but a little uneven around the weld

    Posted by Steve Seebart on 03 08 2018

    I installed this blade on my 18" Grizzly saw the day it arrived--I had a lot of resawing to do. The blade cuts like a hot knife through butter. So far, I've run maple, sapele and walnut through it with no issues. Can't speak to longevity yet, however.

    At the point, the only complaint is the workmanship at the weld. The 3/4" width of the blade expands at the weld by enough that a correctly adjusted support bearing behind the blade rubs when the weld comes around. I had to back the support off, but I still get pulsing and a lot of noise when the saw is in operation.

  3. Great quality blade

    Posted by Unknown on 03 06 2018

    This is the first timber wolf blade I have used. Although I just received the blade and have installed it on my Laguna bandsaw I haven't had time to do much re sawing. For the little I have done I like the way the blade handles. I've used it to re saw both with a fence and without and both ways work very well. Accuracy in re sawing is half the blade and half the setup of the bandsaw. This blade does its job very well. It is very sharp and the weld was well finished. If something changes my opinion in the future I will certainly add to this post.

  4. Great Blade

    Posted by Rick on 02 19 2018

    Just finished setting this blade up on my band saw. Wow, very pleased!
    Very true cut, slice a piece of 5" wide walnut like butter. Very smooth cut. Will take nothing to plan this off. One light pass will do it. Thank you.

    I'll be buying other Timber Wolf blades.

  5. Quality band saw blade

    Posted by Unknown on 02 16 2018

    Just installed and re-sawed pine boards. Cuts great.

  6. very mean blade

    Posted by Mac on 01 30 2013

    I used the 3/4" 2-3 tpi for sawing mesquite logs, up to 11" thick, into slabs for drying & further use. It cut very smoothly and left a nice finish which will reduce the amount to be planed when I use them, in a year or 2.

    Given the thickness of the logs, there was absolutely no drift or problems with the cut.

    I use a Jet 14" with built in 12" height. 1.25 hp motor.

You Recently Viewed...


Follow us on

Copyright 2019 PS Wood Machines. All Rights Reserved.
 Sitemap | BigCommerce Premium Themes by PSDCenter

Click the button below to add the 3/4" x 2/3VPC Series Timber Wolf® band saw blades to your wish list.