BAND SAW STABILIZER

$69.95
(No reviews yet) Write a Review
Weight:
0.50 LBS
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

The unique patented Stabilizer™ is very different from any traditional guide in that it is not designed to hold the blade with immovable support on three sides. Instead, its grooved bearing wheel firmly prevents the blade from moving backwards or shifting left or right while still permitting the front of the blade to twist slightly side to side. This allows the user to make tight radius complex curves that no traditional guide system can achieve.

With traditional guides you can still cut curves, but are limited by the width of your blade as to the radius of the curve. With the Stabilizer, the blade can twist and turn so you are no longer limited by the blade width as to the radius of your curves.

 

CTR2 - For use on General 15" and Grizzly 16" saws equiped with Carter guide kits.

CTR3 - For use on saws equipped with Carter guide kits for Jet 18" and Jet 20".

CTR5 - For use on saws equiped with 7/16" horizontal stud on upper post and Carter brackets. Stabilizer mounts on 7/16" upper post stud.

GRI1 - Fits Grizzly 16" saws only.

INC1 - 10" Inca

KTY1 - Kity brand band saws produced after mid 1995 with Euro style guide.

PWR2 - For Powermatic model 141 with 1/2" round upper post.

PWR3 - Powermatic model PWBS14 with hex roller bearing guides

STD2 - Fits many common 9" and 10" band saws with 5/16" shaft.