#9 SUPER SHARPS™ SCROLL SAW BLADES

I use my scroll saw to make “wall art”. I buy blades by the 100. The Janka hardness in the species that I use ranges from 900 to 2500. The #9 does a great job cutting through the full range. It’s important to recognize when you need to change blades…..obviously the harder the wood the more frequent the change.

Have used over 150 of these blades for creating my art work. Wood thicknesses range from 3/4" to 5/4". Janka values have ranged from 900 to 3,000 and these blades do the job. I will continue to purchase these super sharp blades.

The best I have ever used

I cut 4/4 hard lumber with Janna numbers 2500+ and these blades do very well. I change them out as needed to help the process.

These are the best blades on the market extremely sharp. The cut edge needs no sanding really smooth. I use a couple hundred of these blades a year. The Best!

These blades provide the smoothest cut. They are very thin, but that's what I need. I have had them break on me but it's usually because I didn't have them installed perfectly in the saw. I have an Excalibur scroll saw and it is a very precise machine! I've been using these blades for a few years now and I won't buy anything else!

These scroll saw blades are the best on the market. I buy them by the 100 pack because I use so many doing intarsia and I also make very detailed construction equipment. These blades give a perfectly smooth edge no need to sand. They are a little pricey but worth the extra money

While I haven’t yet used the #9 Super Sharp blade, I have used the #2,#% and #7 and have been completely satisfied with their performance.