Blade Designation: Scrolling
Width: 1/8"
TPI (Tooth Per Inch): 14
Tooth Design: HP (high performance)
Blade Thickness: .025
Kerf: .042
Tooth Hook Angle: 0°
Tooth Set Pattern: 5 Raker Set
Radius of Cut: 7/32”
Thickness of Work Material to be cut
Kiln Dry Wood: Hardwood 1/8” – 2” Softwood 1/8” – 1 1/4”
Plywood, MDF & other Composites: 1/4” – 1”
Soft Metal & Plastic: 1/4" - 1/2″
Videos Hide Videos Show Videos
22 Reviews Hide Reviews Show Reviews
-
Made a scroll saw out of my bandsaw-awesome blade
This blade was amazing - I used it to cut effortlessly through 8/4 Padouk with no problem!
-
1/8"
I have used the 1/8 blade and it performed great not too much sanding.Was introduced to Timber wolf blades 20 years ago at the Woodworking shows in mn thankyou .
-
Good Blade - Very Short Life
I purchased the 62" version for my benchtop saw, and this blade is perhaps the smoothest cutting and fastest 1/8" I've ever used. Unfortunately, I think the blade is a bit too thick for a band size that small, it was far thicker than the Bosch blades I'd been using previously, and I believe that contributed to its weld failure at approximately 2hrs of use, split up into roughly ten-minute runs making parts across the span of a year. The blade was still razor sharp and cutting flawlessly when the weld failed, with no excessive load on the saw or anything of the like. I suspect the blade thickness is just such that it induces excessive forces in the weld on a small diameter wheel. I find it hard to purchase another, as much as I like the blade, ten dollars an operating hour is pretty darn steep.
-
Great Product
I've been using these blades for years. No problems at all. Nice clean cuts, no burning. Great product. Also great company to order from. They always have great service and prompt delivery of the product. Highly recommend this product and PS Wood Machines for their outstanding service. Thank You!
-
dull blade
Blade broke after 1 hour use
-
nice blade
Fit great, super sharp and cuts great. Good price and fast shipping. Will buy again.
-
timber wolf blades
great product
-
Does everything they say it does
Cuts really well and clean! No burning! Bought several more I liked them so much! Highly Recommend for band box makers like myself.
-
cuts like butter, and no burning!
Can't say enough about this blade! Cuts with very little resistance, and very cleanly! No one's blades I've tried come even close to these 1/8" blades! Highly recommend the Timber Wolf Blades!!
