Our 1/8” x 14 tpi x .025 blades are made of high silicon, low carbon steel. The teeth are induction hardened, milled for true tracking, produce a thin kerf and make remarkably tight turns. These blades must be run under a little lower tension which is better for your band saw. Our welds are warranted. The 1/8” blades are used for cutting up to 2” hardwoods, 1-1/4” softwoods, 1/4-1” plywood, MDF and other composites, ¼” non-ferrous metals and plastics. They make a 7/32” radius.