RADIUS
1/8" = 7/32"
3/16" = 3/8"
1/4" = 5/8"
3/8" = 1 1/4"
1/2" = 2 1/2" not recommended for radius cutting
3/4" = 5 7/16" not recommended for radius cutting
1" = 7 1/8" not recommended for radius cutting

BLADE USAGE BY THICKNESS & MATERIAL
H=HARDWOOD
S=SOFTWOOD

1/8" x 14...H=up to 2"...S=up to 1 1/4"

3/16" x 4.....H=up to 6"...S= up to 4"
3/16" x 10...H=up to 2 1/2"...S=up to 1 1/2"

1/4" x 4.....H= 2 1/2"-6"......S= 1 1/2"-4"
1/4" x 6.....H= 3/4"-2 1/2"...S= 1/2"-1 1/2"
1/4" x 8.....H= 3/4"-1 1/2"...S= 1/2"-1"
1/4" x 10...H= up to 3/4".....S= up to 1/2"
1/4" x 14...see below, used for plwood/metal/plastic

3/8" x 3 (.025)...H= 6"-10"..........S= 5"-8"
3/8" x 3 (.032)...H&S= 6"-12" + greenwood
3/8" x 4.............H= 2 1/2"-6"......S= 1 1/2"-4"
3/8" x 6.............H= 3/4"-2 1/2"...S= 1/2"-1 1/2"
3/8" x 8.............H= 3/4"-1 1/2"...S= 1/2"- 1"
3/8" x 10...........H= up to 3/4".....S= up to 1/2"
3/8" x 14...see below, used for plyood/metal/plastic

1/2" x 3 (.025)...H= 6-10"............S= 5"-8"
1/2" x 3 (.032)...H&S= 6"-12" + greenwood
1/2" x 4.............H= 2 1/2"-6"......S= 1 1/2"-4"
1/2" x 6.............H= 3/4"-2 1/2"...S= 1/2"-1 1/2"
1/2" x 8.............H= 3/4"-1 1/2"...S= 1/2"-1"
1/2" x 10...........H= up to 3/4".....S= up to 1/2"
1/2" x 14...........see below, used for plywood/metal/plastic
1/2" x 18...........see below, used for plywood/metal/plastic

3/4" x 2/3..........H= 8"-12"..........S= 6"-10"
3/4" x 2.............H= 8"-12"..........S= 6"-10" & greenwood
3/4" x 3 (.025)...H= 6"-10"..........S= 5"-8"
3/4" x 3 (.032)...H= 6"-10"..........S= 5"-8"
3/4" x 4.............H= 2 1/2"-6"......S= 1 1/2"-4"
3/4" x 6.............H= 3/4"-2 1/2"...S= 1/2"-1 1/2"
3/4" x 8.............H= 3/4"-1 1/2"...S= 1/2"-1"...1"-2" plywood, mdf
3/4" x 10...........H= up to 3/4".....S= up to 1/2"

1" x 2.....H= 8"-12"..........S= 6"-10"
1" x 3.....H= 6"-10"..........S= 5"-8"
1" x 4.....H= 2 1/2"-6"......S= 1 1/2"-4"
1" x 6.....H= 3/4"-2 1/2"...S= 1/2"-1 1/2"
1" x 10...H= up to 3/4".....S= up to 1/2"

PLYWOOD,MDF & OTHER COMPOSITES

1/8" x 14...1/4" - 1"

3/16" x 10...1/4" - 2"

1/4" x 8...1" - 2"
1/4" x 10...1/4" - 1"
1/4" x 14...1/8" - 1/4"

3/8" x 8...1" - 2"
3/8" x 10...1/4" - 1"
3/8" x 14...1/8" - 1/4"

1/2" x 10...1/4" - 1"
1/2" x 14...1/8" - 1/4"
1/2" x 18...1/16" - 1/8"

3/4" x 10...1/4" - 1"

1" x 10...1/4" - 1"


METAL & PLASTICS

1/8" x 14...1/4"

3/16" x 10...1/2"

1/4" x 10...1/2"
1/4" x 14...1/4"

3/8" x 10...1/2"
3/8" x 14...1/4"

1/2" x 10...1/2"
1/2" x 14...1/4"
1/2" x 18...1/8"

3/4" x 10...1/2"

1" x 10...1/2"

Blade Usage Chart & Radius

There are no available products under this category.