Loading... Please wait...

3/8" x 0.025 PC & RK Series Timber Wolf® band saw blade

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
$16.10
Weight:
2.00 LBS
Shipping:
Calculated at checkout

 Product Description

ROUGHING (DRY WOOD)

Our 3/8” x 3 tpi x .025 blades are made of Swedish Silicon Steel. The teeth are induction hardened, milled for true tracking and produce a thin kerf. These blades run under a little lower tension which is better for your band saw. Our welds are warranted. The 3/8” x 3 tpi blades are generally used for gradual curves and straight-line cutting in 6”-10” hardwoods and 5”-8” softwoods. They can also make a 1-1/4” radius cut.

RIPPING & CROSSCUTTING

Our 3/8” x 4 tpi x .025 blades are made of Swedish Silicon Steel. The teeth are induction hardened, milled for true tracking and produce a thin kerf . These blades run under a little lower tension which is better for your band saw. Our welds are warranted. The 3/8” x 4 tpi blades are used for gradual curves and straight-line cutting in 2-1/2”-6” hardwoods and 1-1/2”-4” softwoods. They can make a 1-1/4” radius cut.

Our 3/8” x 6 tpi x .025 blades are made of Swedish Silicon Steel. The teeth are induction hardened, milled for true tracking and produce a thin kerf. These blades run under a little lower tension which is better for your band saw. Our welds are warranted. The 3/8” x 6 tpi blades are used for grandual curves and straight-line cutting ¾”- 2-1/2” hardwoods and ½”-1-1/2” softwoods. They can make a 1-1/4” radius cut.

CURVE, TEMPLATE & PATTERN

Our 3/8” x 8 tpi x .025 blades are made of Swedish Silicon Steel.  The teeth are induction hardened, milled for true tracking, produce a thin kerf and make remarkably tight turns.  These blades run under a little lower tension which is better for your band saw.  Our welds are warranted.  The 3/8” x 8 tpi blades are used for cutting up to  1 ½ ” hardwoods and 1” softwoods.  They can make a 1 1/4” radius cut.  These blades give a smooth, clean finish for minimum sanding.

Our 3/8” x 10 tpi x .025 blades are made of Swedish Silicon Steel. The teeth are induction hardened, milled for true tracking and produce a thin kerf. These blades run under a little lower tension which is better for your band saw. Our welds are warranted. The 3/8” x 10 tpi blades are used for gradual curves and straight-line cutting up to ¾” hardwoods and ½” softwoods. They can make a 1-1/4” radius cut. These blades give a smooth, clean finish for minimum sanding.

 Product Reviews

  1. 9" Skil Bandsaw

    Posted by Timinator on 12 24 2015

    I bought the 9" Skil Band Saw and the Skil 3 Blade Combo Pack...I could NOT BELIEVE how rough they cut...I was going to take the saw back...the Internet said try the Timber Wolf blades.....UNBELIEVABLE, the smooth cut is close to my Scroll Saw, I went with the 4 TPI Blade. I'll never use anything other than Timber Wolf.


You Recently Viewed...

 

Follow us on

Copyright 2016 PS Wood Machines. All Rights Reserved.
 Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the 3/8" x 0.025 PC & RK Series Timber Wolf® band saw blade to your wish list.