Loading... Please wait...

3/16" x 0.025 PC & RK Series Timber Wolf® Band Saw Blade

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
$14.90
Weight:
1.00 LBS
Shipping:
Calculated at checkout

 Product Description

ROUGHING (DRY WOOD)

Our 3/16” x 4 tpi x .025 blades are made of high silicon, low carbon steel. The teeth are induction hardened, milled for true tracking, produce a thin kerf and make remarkably tight turns. These blades must be run under a little lower tension which is better for your band saw. Our welds are warranted. The 3/16” x 4 tpi blades are used for cutting up to 6” hardwoods, 4” softwoods, ¼”-2” plywood, MDF and other composites. They make a 3/8” radius. This blade is a favorite for our woodcarvers to use to rough out their blanks.

CURVE, TEMPLATE & PATTERN

Our 3/16” x 10 tpi x .025 blades are made of Swedish Silicon Steel. The teeth are induction hardened, milled for true tracking, produce a thin kerf and make remarkably tight turns. These blades must be run under a little lower tension which is better for your band saw. Our welds are warranted. The 3/16” x 10 tpi blades are used for cutting up to 2-1/2” in hardwoods and up to 1-1/2” in softwoods. They can make a 3/8” radius. These blades give a clean, smooth finish for minimum sanding and are an excellent scrolling-type blade.

 Product Videos

Benefits of Small Blades on the Band Saw
  • Benefits of Small Blades on the Band Saw

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Follow us on

Copyright 2016 PS Wood Machines. All Rights Reserved.
 Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the 3/16" x 0.025 PC & RK Series Timber Wolf® Band Saw Blade to your wish list.