Loading... Please wait...

1/4" PC & RK Series Timber Wolf® band saw blade

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
$16.55
Weight:
1.00 LBS
Shipping:
Calculated at checkout

 Product Description

ROUGHING (DRY WOOD)

Our ¼” x 4 tpi x .025 blades are made of Swedish Silicon Steel. The teeth are induction hardened, milled for true tracking, produce a thin kerf and make remarkably tight turns. These blades run under a little lower tension which is better for your band saw. Our welds are warranted. The ¼” x 4 tpi blades are used for cutting 2-1/2”-6” hardwoods and 1-1/2”-4” softwoods. They can make a 5/8” radius cut.

CURVE, TEMPLATE & PATTERN

Our ¼” x 6 tpi x .025 blades are made of Swedish Silicon Steel. The teeth are induction hardened, milled for true tracking, produce a thin kerf and make remarkably tight turns. These blades run under a little lower tension which is better for your band saw. Our welds are warranted. The ¼” x 6 tpi blades are used for cutting ¾”- 2-1/2” hardwoods and ½”-1-1/2” softwoods. They can make a 5/8” radius cut. These blades are considered our most universal, multi-purpose blades.

Our ¼” x 8 tpi x .025 blades are made of Swedish Silicon Steel. The teeth are induction hardened, milled for true tracking, produce a thin kerf and make remarkably tight turns. These blades run under a little lower tension which is better for your band saw. Our welds are warranted. The ¼” x 8 tpi blades are used for cutting up to 1 ½ ” hardwoods and 1” softwoods. They can make a 5/8” radius cut. These blades give a smooth, clean finish for minimum sanding.

Our ¼” x 10 tpi x .025 blades are made of Swedish Silicon Steel. The teeth are induction hardened, milled for true tracking, produce a thin kerf and make remarkably tight turns. These blades run under a little lower tension which is better for your band saw. Our welds are warranted. The ¼” x 10 tpi blades are used for cutting up to ¾” hardwoods and ½” softwoods. They can make a 5/8” radius cut. These blades give a smooth, clean finish for minimum sanding.

Our ¼” x 14 tpi x .025 blades are made of Swedish Silicon Steel. The teeth are induction hardened, milled for true tracking, produce a thin kerf and make remarkably tight turns. These blades run under a little lower tension which is better for your band saw. Our welds are warranted. The ¼” x 14 tpi blades are used for cutting up to ¼” plywood, MDF and other composites and up to ¼” soft metal and plastic. They can make a 5/8” radius cut. These blades give a smooth, clean finish for minimum sanding.

 Product Reviews

  1. Very good quality excellent cutting

    Posted by Duane Munn on 04 20 2018

    Works great on my older bandsaw no probs cutting softwood or hard wood. So far ive only cu 1 to 2 inch but it did so like a hot knife on butter


  2. Lived up to the hype

    Posted by Lamar on 02 19 2018

    Wow. This blade exceeded my expectations. After reading many reviews I finally ordered a Timber Wolf and I'm glad I did. Just purchased a new Jet bandsaw and the difference this blade made over the stock blade that came with the saw was amazing. I did some reasonably tight radius in 4 inch Mahogany and it was like butter. Highly recommend to anyone that has never purchased a high end bandsaw blade. Makes a tremendous difference.


You Recently Viewed...

 

Follow us on

Copyright 2018 PS Wood Machines. All Rights Reserved.
 Sitemap | BigCommerce Premium Themes by PSDCenter

Click the button below to add the 1/4" PC & RK Series Timber Wolf® band saw blade to your wish list.